Maxxus Bellevue 3 Person Low EMF Far Infrared Sauna
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 61" W x 42" D x 75" H · 3 person (room for three) · Canadian Hemlock
The Maxxus Bellevue is a freestanding Low EMF FAR infrared cabin in Canadian Hemlock that runs on a dedicated 120V / 20A circuit and assembles in under an hour.
Power: The Bellevue runs on a dedicated 120V / 20A circuit, not a 240V line. A certified electrician should install the 20A outlet and breaker.
Heat: FAR infrared warms the body directly rather than the air, so it runs cooler than a traditional sauna. Ideal range is 118°F to 132°F, with a 140°F maximum.
What's in the Box & Setup Complete cabin · dedicated 20A circuit
Everything that comes with your Maxxus Bellevue and the main setup notes to review before delivery.
In the box
- Pre-built Canadian Hemlock wall, roof, floor, and bench panels
- 7 Low EMF FAR infrared carbon heating panels, pre-installed (3 rear, 1 each side wall, 1 under the bench, 1 floor board)
- Clear tempered glass door with side window
- Interior and exterior LED control panels
- Chromotherapy color lighting plus red light feature
- Bluetooth and MP3 aux sound system with built-in speakers
- Assembly hardware and illustrated instructions
What you provide
The Bellevue is a complete, self-contained cabin. You will need a dedicated 120V / 20A outlet and a spot to put it.
- A dedicated 120V / 20A outlet within reach (installed by an electrician)
- A level indoor floor surface
Setup notes
- Dedicated 120V / 20A circuit Runs on a 120V / 20A dedicated circuit, not 240V. A certified electrician should install the 20A outlet and breaker.
- Two-adult assembly Cabin panels connect with built-in buckle clasps, typically in under an hour.
- Indoor use only Place on carpet or any indoor floor, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most panels connect by built-in buckle clasps, so assembly is largely tool-free.
- Phillips screwdriver
- A second person
- Step stool (optional)
Setup questions? Email info@saunass.com

