Golden Designs Toledo 6-Person Hybrid Infrared Sauna with Harvia Stove
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 80" W x 83" D x 80" H · 6 person · Canadian Hemlock
The Toledo is a freestanding six person hybrid cabin in Canadian Hemlock, full spectrum infrared plus a Harvia 8KW stove, that runs on a dedicated 240V / 40A circuit and assembles with two or more people.
Power: The Toledo runs on a single dedicated 240V / 40A circuit that powers both heat systems, used one at a time. A certified electrician should install the outlet and breaker.
Heat: Infrared mode runs 120°F to 150°F. The Harvia 8KW stove delivers traditional heat at 170°F to 185°F, up to 194°F, with steam over the rocks. One mode per session.
What's in the Box & Setup Complete cabin · dedicated 40A circuit
Everything that comes with your Toledo and the main setup notes to review before delivery.
In the box
- Pre-built Canadian Hemlock wall, roof, floor, and bench panels with retractable lower bench
- 5 PureTech Near Zero EMF carbon panels and 8 near infrared emitters, pre-installed
- Harvia 8KW electric sauna stove with rocks and controls
- 2 Himalayan salt bars
- Dual wide bronze privacy tempered glass doors, wheelchair accessible
- Interior LED control panel with FM, plus Harvia stove controls
- Chromotherapy lighting system
- Fresh air ventilation system
- Bluetooth and MP3 aux sound system with built-in speakers
- Assembly hardware and illustrated instructions
What you provide
The Toledo is a complete, self-contained cabin. You will need a dedicated 240V / 40A outlet and a spot to put it.
- A dedicated 240V / 40A outlet within reach (installed by an electrician)
- A level indoor floor surface
Setup notes
- One dedicated 240V / 40A circuit A single 240V / 40A circuit powers both the infrared system and the Harvia stove, used one at a time. A certified electrician should install it before delivery.
- Assembly with two or more people Cabin panels connect with built-in buckle clasps; the 4 cartons assemble with two or more people; plan on half a day.
- Indoor use only Place on carpet or any indoor floor, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most panels connect by built-in buckle clasps, so assembly is largely tool-free.
- Phillips screwdriver
- A second person
- Step stool (optional)
Setup questions? Email info@saunass.com

