Golden Designs Soria 3-Person Hybrid Infrared Sauna with Harvia Stove
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 65" W x 57" D x 75" H · 3 person · Canadian Hemlock
The Soria is a freestanding hybrid cabin in Canadian Hemlock, full spectrum infrared plus a Harvia 6KW stove, that runs on a dedicated 240V / 30A circuit and assembles with two or more people.
Power: The Soria runs on a single dedicated 240V / 30A circuit that powers both heat systems, used one at a time. A certified electrician should install the outlet and breaker.
Heat: Infrared mode runs 120°F to 150°F. The Harvia 6KW stove delivers traditional heat at 170°F to 185°F, up to 194°F, with steam over the rocks. One mode per session.
What's in the Box & Setup Complete cabin · dedicated 30A circuit
Everything that comes with your Soria and the main setup notes to review before delivery.
In the box
- Pre-built Canadian Hemlock wall, roof, floor, and floating bench panels
- 5 PureTech Near Zero EMF carbon panels and 3 near infrared emitters, pre-installed
- Harvia 6KW electric sauna stove with rocks and controls
- Himalayan salt bar
- Bronze privacy tempered glass door
- Interior LED control panel plus Harvia stove controls
- Oversize chromotherapy lighting
- Bluetooth audio with built-in speakers
- Assembly hardware and illustrated instructions
What you provide
The Soria is a complete, self-contained cabin. You will need a dedicated 240V / 30A outlet and a spot to put it.
- A dedicated 240V / 30A outlet within reach (installed by an electrician)
- A level indoor floor surface
Setup notes
- One dedicated 240V / 30A circuit A single 240V / 30A circuit powers both the infrared system and the Harvia stove, used one at a time. A certified electrician should install it before delivery.
- Assembly with two or more people Cabin panels connect with built-in buckle clasps; the 4 cartons assemble with two or more people over an afternoon.
- Indoor use only Place on carpet or any indoor floor, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most panels connect by built-in buckle clasps, so assembly is largely tool-free.
- Phillips screwdriver
- A second person
- Step stool (optional)
Setup questions? Email info@saunass.com

