Golden Designs Reserve 3 Person Corner Full Spectrum Infrared Sauna
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 54" W x 58" D x 75" H · 3 person (corner unit) · Canadian Hemlock
The Reserve Corner is a freestanding full spectrum infrared cabin with an angled front that fits into a corner, runs on a dedicated 120V / 20A circuit, and assembles with two adults.
Power: The Reserve Corner runs on a single dedicated 120V / 20A non-GFCI circuit, not 240V. A certified electrician should install the outlet and breaker near the corner.
Heat: Full spectrum infrared warms the body directly rather than the air, so it runs cooler than a traditional sauna. Ideal range is 118°F to 132°F, with a 140°F maximum.
What's in the Box & Setup Complete cabin · dedicated 20A circuit
Everything that comes with your Reserve Corner and the main setup notes to review before delivery.
In the box
- Pre-built Canadian Hemlock wall, roof, floor, and corner bench panels
- 3 PureTech Near Zero EMF carbon panels and 5 near infrared elements, pre-installed
- Himalayan salt bar
- Bronze privacy tempered glass door
- Interior touch screen control panel with music control
- Oversize chromotherapy lighting with red light feature, plus exterior ambient lighting
- Bluetooth and MP3 aux sound system with built-in speakers
- Assembly hardware and illustrated instructions
What you provide
The Reserve Corner is a complete, self-contained cabin. You will need a dedicated 120V / 20A outlet and a free corner to put it in.
- A dedicated 120V / 20A outlet near the corner (installed by an electrician)
- A level indoor floor surface
Setup notes
- One dedicated 120V / 20A circuit Runs on a single 120V / 20A non-GFCI dedicated circuit, not 240V. A certified electrician should install the outlet and breaker before delivery.
- Assembly with two adults Cabin panels connect with built-in buckle clasps; plan on two adults and a few hours. The angled door opens diagonally into the room.
- Indoor use only Place on carpet or any indoor floor, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most panels connect by built-in buckle clasps, so assembly is largely tool-free.
- Phillips screwdriver
- A second person
- Step stool (optional)
Setup questions? Email info@saunass.com

