Golden Designs Andermatt Edition 2-3 Person Indoor Traditional Steam Sauna
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 61" W x 50" D x 75" H · 2-3 person · 6.0 kW stove
The Andermatt Edition is a indoor traditional cabin with a 6.0 kW stove, on a dedicated 240V / 30A circuit, assembled by two adults.
Power: The Andermatt Edition runs on a dedicated 240V / 30A for the stove, plus 120V / 15A for the lights and music. A certified electrician should install the 240V circuit and breaker.
Heat: Run the 6.0 kW stove for classic high heat at 170 to 185°F, and pour water over the rocks for steam and loyly.
What's in the Box & Setup Complete cabin · stove + accessories
Everything that comes with your Andermatt Edition and the main setup notes to review before delivery.
In the box
- Pre-built cabin wall, roof, floor, and bench panels
- 6.0 kW electric stove with built-in controls and rocks
- Clear Tempered glass door
- Interior Chromotherapy lighting system + Red Light Therapy Feature
- Interior backrest with accent light
- Interior LED Control Panel with built in FM Station and Bluetooth Connection
- Built in Performance Speakers
- Sandglass, bucket, and scoop
- Assembly hardware and illustrated instructions
What you provide
The Andermatt Edition is a complete, self-contained cabin. You will need a dedicated 240V / 30A circuit (installed by an electrician) and a level indoor spot.
- A dedicated 240V / 30A circuit within reach (installed by an electrician)
- A level indoor surface
- Water for steam over the rocks
Setup notes
- Dedicated 240V / 30A circuit The stove runs on a dedicated 240V / 30A circuit. A certified electrician should install it.
- Two-adult assembly Cabin panels connect with built-in hardware, typically with two adults.
- Add the rocks Place the included rocks in the stove tray before first use; pour water over them for steam.
- Indoor use Place on a level indoor surface, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most cabin panels connect with built-in hardware; the 240V circuit is the one job for an electrician.
- Phillips screwdriver
- A second person
- A certified electrician (for the 240V circuit)
Setup questions? Email info@saunass.com
DISCLAIMER: We cannot guarantee that the colors displayed on our website will exactly match the color of the product or elements of any design. Variations in color may occur due to lighting conditions during photography.
