Dynamic Toscana 3-Person Low EMF Far Infrared Sauna
Need help before ordering?
Book a quick video consult and ask us about power, placement, EMF, delivery, or assembly.
Book a video meetingPrefer email? Contact info@saunass.com
Specifications 60" W x 42" D x 75" H · 3 person · Canadian Hemlock
The Dynamic Toscana is a freestanding Low EMF FAR infrared cabin in Canadian Hemlock that runs on a dedicated 120V / 20A circuit and assembles in about an hour.
Power: The Dynamic Toscana runs on a dedicated 120V / 20A circuit, not a 240V line. A certified electrician should install the 20A outlet and breaker.
Heat: FAR infrared warms the body directly rather than the air, so it runs cooler than a traditional sauna. Ideal range is 118°F to 132°F, with a 140°F maximum.
What's in the Box & Setup Complete cabin · dedicated 20A circuit
Everything that comes with your Dynamic Toscana and the main setup notes to review before delivery.
In the box
- Pre-built Canadian Hemlock wall, roof, floor, and bench panels
- 8 Low EMF FAR infrared carbon heating panels, pre-installed (3 on the rear wall, 1 on each side wall, 1 under the bench, and 2 on the floor board)
- Clear tempered glass door with side window
- Interior LED control panel
- Chromotherapy color lighting plus red light feature and exterior accent lighting
- Bluetooth and MP3 aux sound system with built-in speakers
- Assembly hardware and illustrated instructions
What you provide
The Dynamic Toscana is a complete, self-contained cabin. You will need a dedicated 120V / 20A outlet and a spot to put it.
- A dedicated 120V / 20A outlet within reach (installed by an electrician)
- A level indoor floor surface
Setup notes
- Dedicated 120V / 20A circuit Runs on a 120V / 20A dedicated circuit, not 240V. A certified electrician should install the 20A outlet and breaker.
- Two-adult assembly Cabin panels connect with built-in buckle clasps, typically in about an hour.
- Indoor use only Place on carpet or any indoor floor, with a few inches of clearance around the cabin for airflow.
- Break-in cycle Run one short empty heat cycle before your first session to clear any manufacturing residue.
Recommended for assembly
Most panels connect by built-in buckle clasps, so assembly is largely tool-free.
- Phillips screwdriver
- A second person
- Step stool (optional)
Setup questions? Email info@saunass.com
Compare Dynamic 3 & 4 Person Saunas
See how this Dynamic sauna compares with other models in the lineup.
| Model |
Dynamic Bellagio 3 Person Shop |
Dynamic Lugano 3 Person Shop |
Dynamic Toscana 3 Person You are viewing |
Dynamic Bergamo 4 Person Shop |
|---|---|---|---|---|
| Price | $2,699.00 | $2,699.95 | $3,299.00 | $3,299.95 |
| Capacity | 3 People | 3 People | 3 People | 4 People |
| EMF Level | Low EMF (5 to 10 mG) | Low EMF (5 to 10 mG) | Low EMF (5 to 10 mG) | Low EMF (5 to 10 mG) |
| Wood & Finish | Natural Canadian Hemlock | Natural Canadian Hemlock | Natural Canadian Hemlock | Natural Canadian Hemlock |
| Power | 120V / 20A, dedicated circuit | 120V / 20A, dedicated circuit | 120V / 20A, dedicated circuit | 120V / 20A, dedicated circuit |
| Temperature | 118 to 132°F ideal, up to 140°F | 118 to 132°F ideal, up to 140°F | 118 to 132°F ideal, up to 140°F | 118 to 132°F ideal, up to 140°F |
| Dimensions | 60" W × 48.4" D × 75" H | 60" W × 49.3" D × 75" H | 60" W × 42" D × 75" H | 70" W × 46.3" D × 75" H |
| Weight | 390 lb | 350 lb | 385 lb | 410 lb |

